Use the universal access menu
You can activate the universal access menu during the first installation. Once enabled, you can quickly access the visually impaired and hearing impaired menus when watching TV or external devices.
Tip
•You can also enable the universal access menu by selecting [Setup] > [Installation] > [Preferences] > [Universal access] > [On].
1 When watching TV, press 
OPTIONS. » TheTV options menu appears.
2Select [Universal access], then press OK or 
to enter.
3 Press 
to select one of the following options and press OK to enter.
•[Hearing impaired]: Enables or disables hearing impaired subtitles.
•[Visually impaired]: Selects speaker, headphone or both for [Vol.vis.impaired] audio. Select [Off] to disable audio descriptor. (Only applicable to the UK region).
•[Vol.vis.impaired]: Adjusts the volume of visually impaired audio.
Tip
•Press the colour buttons on the remote control to enter the options.
Use advanced teletext features
Access the teletext options menu
Access the teletext features through the teletext options menu.
1Press MHEG/TELETEXT.
» The teletext screen appears.
2Press 
OPTIONS.
» The teletext options menu appears.
3Press 
to select one of the following options.
•[Reveal]: Hides or reveals hidden information on a page, such as solutions to riddles or puzzles.
•[Cycle subpage]: Cycles through subpages automatically if subpages are available.
•[Language]: Switches to a different language group to display a language correctly when it uses a different character set.
•[Freeze page]: Freezes the current page.
•[Dual screen] / [Full Screen]: Enables and disables dual screen teletext.
4 Press 
to make a selection, then press OK to confirm.
5Press 
BACK to exit the teletext options menu.
Select teletext subpages
A teletext page can hold several subpages. Subpages are displayed on a bar next to the main page number.
1Press MHEG/TELETEXT.
» The teletext screen appears.
2Press P +/- to select a teletext page.
3 Press | to enter a subpage. |
English
Downloaded From | EN 15 |
|
