8 COMPONENT VIDEO (CVI) INPUT CONNECTIONS
Component Video inputs provide for the highest possible color
and picture resolution in the play- back of digital signal source materi- al, such as with DVD players. The color difference signals (Pb, Pr) and the luminance (Y) signal are con- nected and received separately, which allows for improved color bandwidth information (not possible when using composite video or S- Video connections).
1 Connect the Component (Y, Pb, Pr) Video OUT jacks from the DVD player (or similar device) to the (Y, Pb, Pr) in(put) jack on the TV. When using the Component Video Inputs, it is best not to connect a signal to the AV in Video Jack.
The CVI connection will be dominate over the AV1 in Video Input. When a Component Video Device is connected as described, it is best not to have a video signal connected to the AV1 in Video Input jack.
Back of TV
2 Connect the red and white AUDIO CABLES to the Audio (left and right) output jacks on the rear of the accessory device to the Audio (L and R) AV1 in Input Jacks on the TV.
3 Turn the TV and the DVD (or digital accessory device) ON.
4 Press the AV button or the CH + or CH – buttons to scroll the available channels until CVI appears in the upper left corner of the TV screen.
5 Insert a DVD disc into the DVD player and press the PLAY button on the DVD
Player.
Component
Video Cables
(Green, Blue,
Red)
Audio Cables (Red & White)
Accessory Device
Equipped with
Component Video
Outputs
HELPFUL HINT
The description for the component video connectors may differ depending on the DVD player or accessory digital source equipment used (for example, Y, Pb, Pr; Y,
POWER
VCR DVD SAT AMP ACC
SLEEP Select 8
AV ACTIVE CC CLOCK
4 7 3
SOUNDPICTURE
| OK |
SELECT | STATUS |
MENUEXIT
MUTE
VOL H CH
1 2 3
4 5 6
