4
BASIC ANTENNA AND CABLE CONNECTIONS
Your home’s signal input might come from a single (75 ohm) round cable,
a Converter Box, or from an antenna. In either case the connection to the TV is very easy.
1If your Cable TV signal or Antenna signal is a round cable (75 ohm) then you're ready to connect to the TV.
Antenna Connection
Combination
VHF/UHF Antenna (Outdoor or Indoor)
300 to 75Ω
If your antenna has flat twin- lead wire (300 ohm), you first
Adapter
Back of TV
need to attach the antenna wires to the screws on a 300 to 75 ohm adapter.
If you have a Cable Converter Box: Connect the Cable TV sig- nal to the Cable Signal IN(put) plug on the Converter.
2Connect the Cable TV cable or Antenna cable (or 300 to 75 ohm adapter) to the 75Ω plug on the TV.
If you have a Cable Converter Box: Connect the OUT(put) plug from the Converter to the 75Ω plug on the TV.
1
Twin Lead
Wire
Round Cable
75Ω
75 2
Your Cable TV input into your home may be a single (75 ohm)
Direct Cable Connection
cable or use a cable box decoder. In either case the connection is very simple. Follow the steps below to connect your cable signal to your new television.
This connection will supply Stereo sound to the TV.
1Connect the open end of the round Cable Company supplied cable to the 75Ω input on the TV. Screw it down finger tight.
HELPFUL HINT
Cable signal coming from Cable Company
1
75Ω Round
Coaxial Cable
Back of TV
75
After using the AutoProgram Control, press the CH + and – but- tons to scroll through all the channels stored in the television’s memory.
Jack Panel
Back of TV
