Philips 37MD359B user manual  Still Mode,  Switching Each Input Mode, Switching Audio Mode

Still Mode

You can pause the image shown on the TV screen.

Press [FREEZE] to pause the image shown on the TV screen.

FREEZE

•The sound output will not be paused.

•If no signal is detected or protected signal is received during still mode, the image remains paused and the sound output will be muted.

•The still function will be released after 5 minutes.

To cancel still mode, press any button except [y(power)].

Switching Each Input Mode

You can easily switch with the remote control to the DTV (ATSC) and TV (NTSC) or to access external devices when they are connected to the unit.

Press [SOURCE] or [CH +] repeatedly to cycle through the input modes.

Source

TV

Video

Component

HDMI1

HDMI2

HDMI3

DTV/TV channel

Video

Component

HDMI1 (or PC input)

HDMI2

HDMI3

•Pressing [CH -]reverses the direction of the input modes.

This section describes how to switch the audio in the analog mode and how							INTRODUCTION
Switching Audio Mode
to switch the audio language in the digital mode.
	TV						PREPARATION
	Press [SAP/AUDIO] to display the currently selected
	audio mode. While receiving an MTS broadcast,
	press repeatedly to cycle through the available audio
	channel.
				11
				SAP / STEREO			WATCHINGTV
	When all audio are available
	SAP / STEREO					SAP / MONO
			SAP / STEREO
	When stereo and monaural audio are available
							OPTIONAL
	MONO / STEREO					MONO / STEREO
	When SAP and monaural audio are available						SETTING
	SAP / MONO					SAP / MONO
	When only monaural audio is available
			MONO				OPERATING
			(cannot be switched)
	STEREO	: Outputs stereo-audio
	SAP	: Outputs second audio program
	MONO	: Outputs mono-audio					DVD
DTV
1 Press [SAP/AUDIO] to display the currently selected							DVD
	language and the number of available languages.
							SETTING
				11.1
					English 1/3
							TROUBLESHOOTING
2 Press [SAP/AUDIO] repeatedly to cycle through the
	available audio languages.
	• Available languages differ depending on the
	broadcast. “Other” is displayed when the audio						INFORMATION
	language cannot be acquired, or the acquired
	languages are other than English, Spanish or French.
	Note:
	• [SAP/AUDIO] does not control external audio devices.
	• The information display will automatically disappear in a
	few seconds.

19

EN