Philips 37MD359B user manual  Cable Management,  Plug In the AC Power Cord, PC Connection

PREPARATION

No supplied cables are used in this connection:

Please purchase the necessary cables at your local store.

[PC Connection]

This unit can be connected to your PC that has a DVI terminal.

Use an HDMI-DVI conversion cable for this connection and it requires stereo mini plug-RCA conversion cable as well. If you connect this unit to your PC, you can use this unit as a PC monitor.

e.g.)

stereo mini plug-RCA conversion cable

	DVI OUT
personal computer	HDMI-DVI conversion cable
	should be with ferrite core.

The following signals can be displayed:

To HDMI1 Input jack only

HDMI-DVI conversion cable

rear of this unit

Format	Resolution	Refresh rate	Format	Resolution	Refresh rate
VGA	640 x 480	60Hz		1,280 x 768	60Hz
SVGA	800 x 600	60Hz	WXGA
				1,360 x 768	60Hz
XGA	1,024 x 768	60Hz

Other formats or non-standard signals will not be displayed correctly.

Note:

•Please purchase the HDMI-DVI conversion cable that has a ferrite core.

•The following operations may reduce noise.

-Attach a ferrite core to the AC power cord of your PC.

-Unplug the AC power cord and use the built-in battery of your PC.

Cable Management

Keep the cables through this holder to avoid tangle them.

rear of this unit

16

Plug In the AC Power Cord

Make sure that the AC power cord must be plugged to an AC outlet after all the necessary connections are completed.

rear of this unit

AC outlet

AC power cord

Caution:

•Do not connect the AC power cord to a power supply outside the indicated voltage of this unit (AC 120V).

Connecting the AC power cord to a power supply outside of this range may result in fire or electrical shocks.

Note:

•Each time you plugged in the AC power cord, any operations will not be performed for a few seconds.

This is not a malfunction.

EN