Connecting a VCR or DVD Re- corder
Connecting with a Eurocable
1.As shown in the figure below, con- nect aerial cables 1 and 2, and connect Eurocable 3.
2.Press the
key on the remote con- trol display Source list.
3.Press the ï key repeatedly to select
EXT2 and press the Æ / 
key to confirm your selection.
Rear of TV
Cable 
Bottom of TV
1
2 | 3 |
Recorder
Connecting with an aerial cable
As shown in the figure below, connect aerial cables 1 and 2.
1.Tune in the recorder’s test signal and store the test signal in programme number 0.
For information, see Manual Store on page 10 and the user manual of your recorder.
Cable
Bottom of TV
1
2
Recorder
Connecting a decoder and a VCR
1.As shown in the figure below, connect a Eurocable to your decoder and to the euroconnector port of your recorder. For information, see the user manual of your recorder.
Alternately, you can connect your de- coder directly to EXT1 or EXT2 with a Eurocable.
Warning: Do not place the recorder too close to the TV because some recorders are susceptible to signals from the display. Place the recorder at least half a meter away from the screen.
RecorderDecoder
Downloaded From
