20 Troubleshooting
The following table describes some common problems you can encounter when using your TV. Consider the proposed solutions before you call for service.
Symptom | Possible solutions |
| ||
No display on | • | Verify that the power cord is properly connected into the mains | ||
screen |
| socket and into the TV. |
| |
| • If the power cord is correctly inserted but there is no power, per- | |||
|
| form the following steps: |
| |
| • Disconnect power cord or wall plug |
| ||
| • Wait for 60 seconds and then |
| ||
| • Switch on the TV |
| ||
| • | Press the | key on the remote control |
|
|
|
| ||
Poor reception | • | Verify that the aerial is connected to the TV and to the wall aerial | ||
(snow) |
| socket. |
|
|
| • Manually tune your picture as described in Manual Store on page 10. | |||
| • Verify that you have chosen the right TV system. For information | |||
|
| about TV systems, see Manual Store on page 10. |
| |
| • | Check the signal strength by pressing the | key | |
|
|
| ||
No picture | • | Verify that the supplied cables are connected properly | ||
| • Verify that you have selected the correct source. | |||
| • Verify that the child lock is not activated. |
| ||
|
|
| ||
No sound on | • | Ensure that you have chosen the right TV system. For information | ||
certain channels |
| about TV systems, see Manual Store on page 10. |
| |
|
|
|
| |
No sound | • | Verify that the volume is not at the minimum. |
|
•Verify that the mute ( ) mode is not on. If mute mode is on, press
thekey to turn it off.
•Verify that the TV is connected correctly to the peripheral equip- ment.
Foreign language | • | Press the | key to exit the menu. | |
in the TV menus | ||||
|
|
|
•Press thekey.
•Press the key repeatedly to select the fourth item on the menu.
•Press the key twice.
•Press the Î ï keys to select correct language.
•Press the key to confirm selection.
•Press thekey to exit menu.
EN
Downloaded From