Brother BAS-311E service manual Assembly, 4 !5, work clamp lifter wire @1, and tighten the bolt @2

Chapter 3. Assembly

9. Attach the tension release assembly q to the machine body with the screw !2.

10.Attach the cord holder !3to the machine body.

!2

q

11.Attach the tension release bar !4, the pin !5and the thread tension assembly !6to the machine. Fit the set screw !7in the groove of the thread tension assembly !6, then tighten it.

!7

!4 !5

!6

	12.Turn the stepping solenoid !8fully in the direction of
@1	the arrow. Move the lifter lever t so that there is no
!8	clearance (0 mm) between work clamp lifter lever !9
	and the presser bar clamp @0, remove the slack from the

@0	work clamp lifter wire @1, and tighten the bolt @2.
	!9
	@2
	t
	@0
	!9

28 BAS-311E.311EL.326E.326EL