Philips 380 Duo Vox, Onis 380 Vox manual Babysit mode, Registration, Handset

To set the notification beep

The notification beeps are audio indicators heard when there is a new SMS or a message on the voice mailbox.

1- Go to Handset, validate

2- Select Sounds, validate

3- Scroll to Notification beep, validate

4- Select ON/OFF, validate

The babysit mode

This feature allows you to monitor the baby’s room. Place the handset in the room to be monitored and you will hear the noise coming from the room on the additional handset.

To activate/deactivate the babysit mode 1- Go to Handset, validate

2- Scroll to Babysit mode, validate

3- Select ON/OFF, validate

An Intercom is necessary to monitor the room (see page 27). Note :You can still answer a call or make a call with the handset.

Warning : If, when a handset is in babysit mode ON, if another handset transfers a call, then the former automatically answers the internal call.

Registration

Up to 8 handsets can be registered to the base station. 1 handset can be associated to 4 base stations. Warning : If you wish to associate non Philips handsets to the Onis 380 Vox base station, make sure that this handset is GAP compliant otherwise it will not operate properly (See page 41).

To register an additional handset

1- Unplug and plug back in the mains lead to put the base into registration mode

2- With the additional handset, press to start the registration

3- Enter the 4-digit RC code written on the sticker placed under the base station.

4- Validate

If successful, the additional handset will be named & numbered (Philips2). The attached digit is linked to the registration order.

To un-register the handset 1-Go to Handset, validate

2- Scroll to Registration, validate

3- Select Un-register handset, validate

4- Choose in the list the handset to un-register, validate 5- Enter the RC code (4-digit code) and validate

Note : If you can, un-register a defective handset before returning the product to the repair centre.

Handset 19