8
4
1
Switch on the TV.
» The TV starts up with the new software.
• The following messages are displayed without starting software upgrade when it doesn’t fulfill the upgrade conditions.
» The TV scans the USB device for the upgraded software and automatically enters upgrade mode.
5 Read the on-screen instructions and confirm that you want to continue with the installation.
Software upgrade in progress. Please wait.
Do not remove the USB storage device or turn the TV off while upgrade is in progress.
Downloading... 60%
6 When the software upgrade is complete, remove the USB device.
7 Press . POWER at the side of the TV to make sure the unit goes to standby mode.
Switch on the TV.
New software can be downloaded from our website at www.philips.com/support using the model number of your TV (e.g. 46PFL3706) to find information.
Checking your current software version
1 Press MENU on the remote control and select [Features] > [Current Software Info].
» The version and a description of the current software is displayed, then press OK.
2 If the TV is on, press . POWER at the side of the TV.
3 Connect your USB device to the service terminal on the side of your TV.
Philips continuously tries to improve its products and we strongly recommend that you upgrade theTV software when upgrades are available.
Prepare the software upgrade (see ‘Preparing for the software upgrade’ on page 26).
Upgrading software
8 Upgrade your TV software
Sound
Release Version:
SetupXXXXXXX_XXX_X_XXXX
Features
Language
USB
2 Press MENU to exit.
Preparing for the software upgrade
You require the following equipment:
•A PC with web browsing capability.
•An archive utility that supports the ZIP-format (e.g.WinZip for Windows or StuffIt for Mac OS).
•An empty clean formatted USB stick.
Note
•Only FAT/DOS-formatted portable memory is supported.
•New software can be downloaded from www.philips.com/support
•Use only software upgrades that can be found on the Philips web site.
Warning
•When the software upgrade is running, don’t press any buttons.
•Do not remove the USB device during the software upgrade.
•If an error occurs during the upgrade, retry the procedure or contact your dealer.
Downloading the software
1 On your PC, open a web browser and go to www.philips.com/support
2 Find information and software related to your TV and download the latest software upgrade file to your PC.
3 Decompress the ZIP-file.
4 Copy the upgrade file to the root directory of the USB device.
26EN
The version of this update file is the same or older |
than the current version. |
Please check the file and try again. |
