Philips 32PFL5605S/98, 40PFL5605S/98 Use Philips EasyLink, EasyLink features, EasyLink buttons

8If there is video and audio output, press

OK.

Repeat the procedure until all devices are correctly assigned to connectors.

Use Philips EasyLink

Your TV supports Philips EasyLink, which uses the HDMI CEC (Consumer Electronics Control) protocol. EasyLink-compliant devices that are connected through HDMI connectors can be controlled by a single remote control.

Note

Philips does not guarantee 100% interoperability with all HDMI CEC devices.

Note

The EasyLink-compliant device must be switched on and selected as the source.

EasyLink features

One-touch play

When you connect your product to devices that support one-touch play, you can control your product and the devices with one remote control. For example, when you press Play on your DVD remote control, your TV automatically switches to the correct channel to show the DVD content.

One-touch standby

When you connect your TV to devices that support standby, you can use your TV remote control to put your TV and all connected HDMI devices in standby mode.

System audio control

When you connect your TV to HDMI CEC compliant devices, your TV can switch automatically to play audio from the connected device.

To use one-touch audio, you must map the
audio input from the connected device to	English
You can use the remote control from the
your TV.
connected device to adjust the volume.
Remote control (RC) key forwarding
RC key forwarding allows you to control
EasyLink-compliant devices using your TV
remote control.

EasyLink buttons

You can control EasyLink-compliant devices with the following buttons on the remote control of your TV.

Button			EasyLink function
		(Play/	Starts, pauses or resumes
Pause)			playback on your EasyLink
			device.
		(Stop)	Stops playback on your EasyLink
			device.
(Record)			Starts or stops video recording
			on your EasyLink device.
		(Fast	Searches backward.
Backward)
		(Fast	Searches forward.
Forward)
0-9			When EasyLink is enabled,
(Numeric			selects a title, chapter or track.
buttons)
			Navigates through the menus of
			the EasyLink-compliant device.
OK			Activates a selection or accesses
			the menu of the EasyLink-
			compliant device.
			Displays the menus of the
OPTIONS			EasyLink-compliant device. Press
			(Home) to display the TV
			menu.
(Standby-			When EasyLink is enabled,
			switches the TV and all EasyLink
	On)		devices to standby. Press and
			hold (Standby-On) for at least
			3 seconds.

EN 25

Downloaded From TV-Manual.com Manuals