Philips 46PFL8007, 40PFL8007 Power cable, Antenna, Wireless connection, Wps, Setting up / Network

Models: 55PFL8007 46PFL8007 40PFL8007

1 69
Download 69 pages 1.35 Kb
Page 7
Image 7

2.3

Power cable

Insert the power cable into the POWER socket of the TV. Make sure the power cable is securely inserted into the TV. Make sure that the power plug in the wall socket is accessible at all times.

When disconnecting the power cable, always pull the plug, never the cable.

Although this TV has a very low standby power consumption, unplug the power cable to save energy if you do not use the TV for a long period of time.

In Help, press *List and look up Standby for more information on switching the TV on and off.

2.4

Antenna

Locate the antenna connection at the back of the TV. Insert the antenna cable securely into the Antenna a socket.

You can connect your own antenna or connect to an antenna signal from an antenna distribution system (common in certain regions). Use an IEC Coax 75 Ohm RF antenna connector.

Use this antenna connection for DVB-T and DVB-C input signals.

Wireless connection

What you need

To connect the TV wirelessly to the Internet, you need a wireless router. Use a high-speed (broadband) connection to the Internet.

Media server software

With media server software on your computer, you can open your photos, music and videos stored on your computer on your TV screen.

Use a recent version of media server software like Windows Media Player 11, Twonky™ or similar*.

Install the software on your computer and set it up to share your media files with the TV. Read the manual of the media server software for more information.

To open your files on the TV, the media server software must be running on your computer.

*In Help, press *List and look up Media server software, supported for an overview of supported media server software.

Make the connection

Follow steps 1 to 5.

Step 1 - Make sure that the router of your wireless network is switched on.

Step 2 - Press hand select S Setup and press OK. Step 3 - Select Connect to network and press OK. Step 4 - Select Wireless and press OK.

Step 5 - Select Scan to scan for your wireless network. If you have a router with WPS (Wi-Fi Protected Setup), you can select WPS. Select your choice and press OK.

-Scan

Select Scan to scan for your wireless network (your wireless router). The TV might find several wireless networks in your proximity.

-WPS

Setting up / Network

7

Page 7
Image 7
Philips 46PFL8007, 40PFL8007, 55PFL8007 manual Power cable, Antenna, Wireless connection, Wps, Setting up / Network