6.4 Picture and sound

No picture

Check if the antenna is connected properly.

Check if the correct device is selected and connected properly.

Check the contrast or brightness setting in h > Setup > TV settings > Contrast or Brightness.

The picture is poor

Bad weather can influence the picture quality.

Check if the antenna is connected properly.

Non-earthed audio devices, neon lights, high buildings or mountains can influence the picture quality. Try to improve the picture by changing the position of the antenna or placing devices away from the TV.

Check that the correct TV system is chosen in the Manual installation menu.

If only a certain channel is poor, try to fine tune this channel with the Fine tune menu. Read Help > Setup > Channels > Manual installation - Analogue.

The picture has poor colour

Check the colour settings in h > Setup > TV settings. Or press s (Adjust) to select a Smart picture setting.

Picture delay when a game console is connected

To prevent picture delay, press s (Adjust), select Smart picture > Game.

The TV does not remember my settings when I switch it back on

Check whether the TV is set to the Home location. Press s > Setup > TV settings > Preferences > Location.

The picture does not fit the screen

• Press s (Adjust), Picture format and select Auto fill.

The picture position on screen is not correct

To correct a shifted picture, press s (Adjust) and select Picture shift. Use the navigation keys to adjust the picture position. Press OK to stop Picture shift.

If distorted screen edges are visible, press h > Setup > TV settings > Picture > Screen edges and use the slider bar to enlarge the picture slightly.

There is a picture but no sound

Check the volume is not set to 0.

Check the sound has not been muted with m.

Check that all cables are connected properly.

If no sound signal is detected, the TV automatically switches off sound. This is proper operation and is not a malfunction.

The sound is poor

Try any Smart sound setting, press s (Adjust), Smart sound .

Check that the sound is set to Stereo.

The sound comes from one speaker only

Check the Balance setting. Press h > Setup > TV settings > Sound > Balance. Use the slider bar to set the balance.

Sound delay

If there is an audio to video sync mismatch when sound comes from a Home Theatre System, an audio sync delay needs to be set up. Read more about Audio to Video sync in Help > Setup > Devices > Audio to Video sync.

Troubleshooting / Picture and sound

73

Downloaded From TV-Manual.com Manuals

Page 73
Image 73
Philips 46PFL8505, 40PFL8505 manual Picture and sound