Philips 42MD459B user manual 5Channel List, 5Add Channels

5Channel List

The channels selected here can be skipped when selecting the channels using [CH + / -].

Those channels can still be selected with [the Number buttons].

1Press [MENU / EXIT] to display the main menu.

2Use [Cursor K/L] to select “SETUP”, then press [OK].

or	PICTURE	Autoprogram
	SOUND	Channel List
	SETUP	Add Channels
	FEATURES	Antenna
	LANGUAGE

BLU-RAY

USB

3Use [Cursor K/L] to select “Channel List”, then press [OK].

or	PICTURE	Autoprogram
	SOUND	Channel	List
	SETUP	Add Channels
	FEATURES	Antenna
	LANGUAGE
	BLU-RAY
	USB

4Use [Cursor K/L] to select the channel you want to remove, then press [OK].

or
	PICTURE			DTV	11.1
	SOUND			DTV	11.2
	SETUP	Highlight channels for Ch Up/Down key		DTV	11.3
	FEATURES
		selection.
	LANGUAGE
	BLU-RAY
	USB
		Ch Select	OK Watch/Skip	BACK	Back

•The channel display for the removed channel darkens. You will not be able to select the channel again using [CH + / -].

•To reactivate a removed channel, use [Cursor K/L] and press [OK]. The registered channels are highlighted.

•When you remove a main channel, its subchannels are removed as well.

Note:

•The channel with the “DTV” indicated on the display is ATSC. Otherwise the channel is NTSC.

5Press [MENU / EXIT] to exit.

5Add Channels	INTRODUCTION
This function lets you add the channels that were not added by the
autoprogram due to the receptible condition at the initial setting.
	PREPARATION
1 Press [MENU / EXIT] to display the main menu.

2Use [Cursor K/L] to select “SETUP”, then press [OK].

	or						WATCHING
		PICTURE		Autoprogram
		SOUND		Channel List
		SETUP		Add Channels
		FEATURES		Antenna
		LANGUAGE
		BLU-RAY
		USB					TV
3 Use [Cursor K/L] to select “Add Channels”, then press							OPTIONAL
	[OK].
	or						SETTING
		PICTURE		Autoprogram
		SOUND		Channel List
		SETUP		Add Channels
		FEATURES		Antenna
		LANGUAGE
		BLU-RAY
		USB					OPERATING
							BLU-RAY
4 Use [the Number buttons] to enter the number of the
	channel you want to add, then press [OK].
							BLU-RAY
					11
							SETTING
		PICTURE				Add channels
		SOUND	For analog channels, select a channel to be
		SETUP	added using number keys.
		FEATURES	For digital channels, you must perform
		LANGUAGE	Autoprogram function.
		BLU-RAY
		USB					TROUBLESHOOTING
				Ch Change BACK Back
5 Press [MENU / EXIT] to exit.
							INFORMATION
	• If external input is used, it is not possible to register the
	Note:
	• If setup completes successfully,
	“Added to the channel list” is displayed.
	channel and “Unavailable” will be displayed on the TV
	screen.
	• By using [CH + / -], you can select the memorized channels
	only.

23

EN