Connect your computer
AV3
L |
|
| VGA |
UADIO | Y/Pb/Pr (2Fh) |
HDMI R |
|
2
1
You may connect your computer to the VGA connector of AV3 or to the HDMI connector (see further).
&Connect one end of a VGA cable 1 to the video card of the computer and the other end to the VGA Y/Pb/Pr 2Fh 1 connector at the bottom of the TV.
Fix the connectors firmly with the screws on the plug.
éIn case of a Multimedia computer, connect the audio cable 2 to the audio outputs of your Multimedia computer and to the AUDIO R (right) and L (left) inputs.
The VGA connector allows the following TV and
monitor display modes: |
| |
VGA | 640 x 480 | 60 Hz |
SVGA | 800 x 600 | 60 Hz |
XGA | 1024 x 768 | 60 Hz |
Note:
If possible, use the XGA1024x768@60Hz video mode to obtain the best image quality for your 30PF9946 LCD monitor.
To select connected devices
B
vVCR DVD TV SAT AMP
v SELECT†
® Ò ‡ π
TV | PC | HD |
º b
OK
&Press the v key repeatedly to select AV1, AV2, AV3, Side or TV channels, according to where you connected your devices.
éPress the cursor up/down.
“Press OK.
Record with your recorder
To record
Record a TV program
You can record a TV program using your recorders tuner without affecting your TV.
&Select the channel number on your recorder.
éSet your recorder to record.
See the handbook for your recorder.
Switching channel numbers on your TV does not disturb recording !
Record a recorder from MONITOR OUT
You can record a program on your recorder from the TV tuner via MONITOR OUT.
&Switch on the device.
éSelect the correct channel on your TV and the correct input on your recorder.
“Set your recorder to record.
You record the tuner channel of the TV, even when you switch to an AV input using the v key on the remote control.
Do not switch channels or turn off your TV when you are recording through MONITOR OUT.
8
