Manually install channels
This section describes how to search and store analogueTV channels manually.
1Press 
MENU.
2Select [Installation] > [Channel install.] > [Analogue: Manual]
»The [Analogue: Manual] menu appears.
Menu language | Channel assistant |
Picture |
|
Channel install. | Analogue: Manual |
Preferences
Sound
Decoder
Factory settings
Features
Current software
Installation
3Press 
to select the item you want to adjust.
•[System]
•[Search]
•
•[Store cur. chan.]
•[Store new channel]
•[Skip channel]
Step 1 Select your system
Note
•Skip this step if your system settings are correct.
1Press 
MENU.
2Select [Installation] > [Channel install.]
>[Analogue: Manual]
»The [Analogue: Manual] menu appears.
3 Press | to select and enter [System]. |
4Press 
to select your country or region.
5Press OK to confirm.
6Press 
MENU to exit.
Step 2 Search and store new TV channels
1Press 
MENU.
2Select [Installation] > [Channel install.]
>[Analogue: Manual].
»The [Analogue: Manual] menu appears.
3 Press | to select and enter [Search]. |
4Press 
or use Numeric buttons to manually enter the three digit frequency.
5Press OK to begin search.
»If a channel is unavailable at the selected frequency. press OK to search for the next available channel.
6Press 
BACK when the new channel is found.
7Press 
to select [Store new channel] to store the new channel under a new channel number.
8Press 
to enter [Store new channel].
9 Press 
to select [Yes] and press OK to store the new channel.
10 Press 
MENU to exit.
Step 3 Fine-tune analogue channels
1Press 
MENU.
2Select [Installation] > [Channel install.] > [Analogue: Manual].
»The [Analogue: Manual] menu appears.
3 Press | to select and enter [Fine- |
tune]. |
|
4Press 
to adjust frequency.
5Press OK when done.
6Press 
to select [Store cur. chan.] to store channel number.
7Press 
to enter [Store cur. chan.].
8 Press 
to select [Yes] and press OK to store current channel.
9Press 
MENU to exit.
English
EN 19
