Installing Options

Precautions When Installing Printer Options

Installing Printer Memory

Installing an Optional Tray 2

Precautions When Installing Printer Options

Never remove the control board while the printer is plugged in.

To avoid the possibility of an electrical shock, always disconnect the power cord when installing or removing ANY internal or external printer option.

The control board and internal printer memory are sensitive to static electricity. Before installing or removing an internal printer memory, discharge static electricity from your body by touching something metal on any device plugged into a grounded power source. If you walk around before finishing installation, discharge any static electricity once again.

Installing Printer Memory

Additional printer memory is provided on a Dual In-line Memory Module (DIMM).

NOTE: Your multifunction printer supports only Dell DIMMs. Order Dell DIMMs online at www.dell.com.

1.Power the multi-function printer off and unplug all cables from the multi-function printer.

2.To remove the control board cover, pull out gently, as shown.

Page 161
Image 161
Dell 1600n manual Precautions When Installing Printer Options, Installing Printer Memory