Use envelopes that can withstand temperatures of 205° C (401° F) without sealing, excessive curling,
wrinkling, or releasing hazardous emissions. If you have any doubts about the envelopes you are
considering using, check with the envelope supplier.
Adjust the width guide to fit the width of the envelopes.
Load an envelope with the flap side down and with the stamp area on the top left side. The end of the
envelope with the stamp area enters the manual feeder first.
See "Using the Manual Feeder" on page 64 for instructions on loading an envelope.
A combination of high humidity (over 60%) and the high printing temperatures may seal the
envelopes.
Labels
Your multi-function printer can print on many labels designed for use with laser printers. These labels are
supplied in letter size, A4 size, and legal size sheets. Label adhesives, face sheet (printable stock), and
topcoats must be able to withstand temperatures of 205° C (401° F) and pressure of 25 pounds per square
inch (psi). You can load one label sheet at a time in the manual feeder.
Try a sample of any label you are considering using with the multi-function printer before purchasing a large
quantity:
Use full label sheets. Partial sheets may cause labels to peel off during printing, resulting in a jam.
Partial sheets also contaminate your multi-function printer and your cartridge with adhesive, and could
void your multi-function printer and cartridge warranties.
Use labels that can withstand temperatures of 205° C (401° F) without sealing, excessive curling,
wrinkling, or releasing hazardous emissions.
Do not print within 0.04 in. (1 mm) of the edge of the label, of the perforations, or between die-cuts of
the label.
Do not use label sheets that have adhesive to the edge of the sheet. We recommend zone coating of