Dell 1600n manual Redialing, Sending Broadcasting Faxes

Redialing

To redial the number you last called:

Press <Redial/Pause>.

When a document is loaded in the ADF (Automatic Document Feeder; see page 120), the multi-function printer automatically begins to send.

For the document loaded on the scanner glass, the display asks if you want to load another page. Select "1:Yes" to add. Otherwise, select "2:No"

Sending Broadcasting Faxes

Using the <Broadcasting> button on the operator panel, you can use the broadcasting fax feature, which allows you to send a document to multiple locations. Documents are automatically stored in the memory and sent to a remote station. After transmission, the documents are automatically erased from the memory.

1. Load the document(s) face up with top edge in first into the ADF.

OR

Place a single document face down on the scanner glass.

For details about loading a document, see page 120.

2. Adjust the document resolution to suit your fax needs (see page 122).

If you need to change the contrast, see page 118.

3.Press <Broadcasting> on the operator panel.

4.Enter the number of the remote machine using the number keypad.

You can also use one, two, or three-digit speed dial or group dial numbers. For details, see "Automatic Dialing" on page 128.

5.Press <Select> to confirm the number. The display asks you to enter another fax number to send the document to.

NOTE: Your multi-function printer can send one broadcasting fax to multiple destinations. The "Enter Number" prompt does not appear if a broadcast is set up and not completed. You must wait until the current broadcast is completed.

6. If you want to enter more fax numbers, repeat steps 4 and 5. You can add up to 10 destinations.

Note that you cannot use more than one group dial number per broadcast operation.