NOTICE: Never load envelopes with stamps, clasps, snaps, windows, coated linings, or self-stick adhesives.
These envelopes may severely damage the multi-function printer. The stamp is shown in the
illustration only for placement.
Adjust the paper guide to the width of the print material.3.
The multi-function printer picks up the material from the tray and begins printing.
NOTE: When printing on previously printed paper from the manual feeder, the printed side should be
facing down with an uncurled edge to the multi-function printer. If you experience problems with
paper feed, turn the paper around.
Open the rear cover to use the rear output slot.
4.
After printing, close the rear cover.5.