Display
Meaning
Suggested solutions
[Manual F. Jam]
Cancel ?
1:Yes 2:No
A paper jam has occurred in the manual feeder or the
Your printer's memory is full and cannot store the document to send a fax into its memory.
Clear the paper jam. See page 164.
Load paper in the manual feeder correctly. See page 25.
To cancel the fax job, press the 1 button to accept "Yes."
If you want to send the pages that were stored, press the 2 button to accept "No." You should send the remaining pages later when memory is available.
[COMM.
Error]
CRU Fuse
Error
[Low Heat Error]
Heating
Error
Open Heat Error
[Over Heat]
Delayed
Function
Full
The
There is a problem in the fuser unit.
The delayed fax jobs are full.
Ask the sender to try again.
Unplug the power cord and plug it back in. If the problem persists, please call for service.
Cancel the unnecessary delayed fax job. For details, see page 137.
Document Jam
The loaded document has jammed in the Automatic Document Feeder (ADF).
Clear the document jam. See page 162.
[Door Open] | The front or rear cover is not securely | Close the cover until it locks into place. |
| latched. |
|
Enter Again | You entered an unavailable item. | Enter the correct item again. |
Function Not | You have tried to use a combination of | Reduce the number of selected |
Available | printer functions that can not be used at | functions or use only one function at a |
| the same time. | time. |
Group No. is assigned
Group Not Available
The group dial location you tried to select has speed dial numbers assigned to it.
You have tried to select a group location number where only a single location number can be used, such as when adding locations for a broadcasting operation.
Press <Return> to start over with another group dial location.
Use a speed dial number or dial the number manually using the number keypad.