The scan lamp under the scanner glass automatically turns off when it is not in actual use during a preset period to reduce power consumption and extend the lamp life. The lamp automatically turns on and the warm-up cycle begins whenever any key is pressed or the document cover is opened or a document is detected in the ADF.

You can set the length of time for which the scan lamp waits after a scan job is completed before it switches to the Power Save mode.

1.Press <Menu> until "Printer Setup" appears on top line of the display.

2.Press the scroll button ( or ) until "CCD Power Save" appears on the bottom line. Press <Select>.

3.Press the scroll button ( or ) until the time setting you want appears on the bottom line.

The available time options are 0.5, 1, 4, 8, and 12 (hours).

4.Press <Select> to save the selection.

5.To return to Standby mode, press <Return>.

Page 26
Image 26
Dell 1600n manual