To connect the multi-function printer to a computer:

1.Make sure the multi-function printer, computer, and any other attached devices are powered off and unplugged.

2.Connect a USB cable to the USB connector on your multi-function printer.

3. Connect the other end of the cable into an available USB port on the computer, not the USB keyboard.

Connecting the Multi-Function Printer to the Network

1.Make sure the multi-function printer, computer, and any other attached devices are powered off and unplugged.

2.Connect one end of a standard category 5 Unshielded Twisted Pair (UTP) network cable into a LAN drop or hub, and the other end into the Ethernet network port on the back of the multi-function printer. The multi-function printer automatically adjusts for the network speed.

NOTE: After connecting the multi-function printer, you need to configure the network parameters on the operator panel. See page 147 .

Page 23
Image 23
Dell 1600n manual Connecting the Multi-Function Printer to the Network