4 Use your TV
Switching on your TV and putting it in Standby mode
| 40PFL4708 / | 40PFL1708 / |
50PFL3708 / | 32PFL4508 / | |
29PFL4508 / | 39PFL2708 / | |
46PFL3708 | 24PFL4508 | 32PFL3508 |
* Key on Rear
To Turn the TV On from Standby or Off to Standby
•Press 
(3 raised dots on the Rear panel or Front panel or the Remote control).
Note
•Energy consumption contributes to air and water pollution. When the AC power cord is plugged in, your TV consumes energy. Your TV has very low standby power consumption.
Adjusting volume
| 40PFL4708 / | 40PFL1708 / |
50PFL3708 / | 32PFL4508 / | |
29PFL4508 / | 39PFL2708 / | |
46PFL3708 | 24PFL4508 | 32PFL3508 |
* Key on Rear
To decrease or increase volume
•Press VOL ◄ / ► (1 raised dot on the Rear panel or Front panel) or press VOL + / − on the Remote control.
VOL ◄ : Volume Down
VOL ► : Volume Up
To mute or unmute sound
18 English
Switching channels
| 40PFL4708 / | 40PFL1708 / |
50PFL3708 / | 32PFL4508 / | |
29PFL4508 / | 39PFL2708 / | |
46PFL3708 | 24PFL4508 | 32PFL3508 |
* Key on Rear
To select Channels by using CH ▼/▲ or CH + / −
•Press CH ▼ (Down) / ▲ (Up - 1 raised dot on the Rear panel or Front panel) or press CH + / − on the Remote control.
To select Channels by using the NUMBER buttons
Digital TV operation
•For Digital channels, press a number followed by a dot “•” and the corresponding sub channel number.
–When selecting Digital channel 11.1
Be sure to press • before entering the subchannel number.
Analog/Cable TV operation
–When selecting cable or Analog channel 11
Press PREV.CH to return to the previously viewed channel.
Note
•To select the
•No Signal will appear on the TV screen after the subchannel broadcast is over.
•Audio only program message will appear on the TV screen, when you receive only sound signal.
*On the 46” & 50” TV’s All CONTROL Keys are located on the Rear (lower right) side of the unit as viewed from the Front.
•Press 
on the remote control to mute the sound.
•Press 
again or VOL + / − to recover the original sound.
