6 Upgrade your TV software
Philips continuously tries to improve its products and we strongly recommend that you upgrade the TV software when upgrades are available.
New software can be downloaded from our website at www.philips.com/support
using the model number of your TV to find information.
Checking your current software version
1 Press 
and use ▲▼ to select Features, then press OK. 2 Use ▲▼ to select Software upgrade, then press OK.
Picture Current software info
Sound Upgrade
Setup
Features
Language
USB
3 Use ▲▼ to select Current software info, then press OK.
•The version and a description of the current software is displayed.
Picture | Back | |
Sound | Release Version: | |
Setup | ||
XXXXXXX_XX_XX_XXXX_XX | ||
|
Features
Language
USB
Upgrading the software
You can upgrade the software by using USB Memory Stick.
Preparing for the software upgrade
You require the following equipment :
•A PC with web browsing capability.
•An archive utility that supports the
•An empty clean formatted USB Memory Stick.
Note
•Only FAT /
•Use only software upgrades that can be found on the Philips web site.
33 English
Downloading the software
Find information and software related to your TV and download the latest software upgrade file to your PC.
1 On your PC, open a web browser and go to www.philips.com/support
2 Enter the model number in the “Type the Model Number...” field.
3 Click the desired software to be downloaded.
• Decompress the
4 Copy the upgrade file to the root directory of the USB Memory Stick.
Starting the software upgrade
Warning
•When the software upgrade is running, don’t press any buttons.
•Do not remove the USB Memory Stick during the software upgrade.
•If an error occurs during the upgrade, retry the procedure or for further assistance, please contact Call Center.
1Connect your USB Memory Stick with the upgrade file to the USB terminal on the side of your TV.
2 Press 
and use ▲▼ to select Features, then press OK.
3 Use ▲▼ to select Software upgrade, then press OK.
4 Use ▲▼ to select Upgrade, then press OK.
5 Read the
Picture | Start now | |
Sound | Would you like to upgrade the | |
Setup | ||
software? | ||
Features | ||
| ||
Language |
| |
USB |
| |
|
|
6 When the software upgrade is completed, press 
to set the unit into Standby mode, then remove the USB Memory Stick and then press 
again to Turn the unit On.
•The TV starts up with the new software.
For further assistance, please contact Call Center.
