3.ADJUSTMENTS
3.1LEDs and Equipment Status
The six LEDs above the heading indication light, flash or go off according to equipment status.
GPS OUTPUT PROCESSING
Status LEDs |
|
for | SENSOR1 |
|
CR33: Status LED for
SENSOR2
Heading 
Pitch 
Roll
Sentence 
Bps 
Output
Interval
Sentence 
Bps 
Output
Interval
Menu/ 
Enter
Cancel
LED state and equipment status
-
+
LED | LED state and equipment status |
|
|
GPS | ON: Both GPS antennas in the |
| lites. |
| OFF: One of the GPS antennas is receiving from 3 or fewer satellites. |
|
|
OUTPUT | ON: All data is output from the |
| Flashing: Motion (heading, roll, pitch) is output (heave is fixed at 0, position |
| and speed are normal) by dead reckoning. |
| OFF: Heading output is stopped. |
|
|
PROCESSING | ON: GPS processor is functioning properly. |
| Flashing: Initializing for GPS. |
| OFF: Not enough satellites received. |
|
|
SENSOR1 | ON: Rate gyro normal on all three axes. |
| OFF: Rate gyro error. |
|
|
SENSOR2 | ON: Acceleration sensor normal on all three axes. |
| OFF: Acceleration sensor error. |
|
|
CR33 | Flashing: Valid NMEA 2000 data is input. |
| ON: No valid NMEA 2000 data is input. |
| OFF: CPU error, or no power. |
|
|
4
