Furuno IF-NMEASC manual Memory Clear

5. MAINTENANCE, TROUBLESHOOTING

Self test 2

This test checks this unit's processor and output for proper operation.

1.With the display showing " - - - .1", push the [Menu/Cancel] button. The display shows "- - - 2".

GPS OUTPUT PROCESSING

IF-NMEASC status

SENSOR1 SENSOR2

Self test 2 activated

Heading Pitch Roll

Sentence Bps Output

Interval

Sentence Bps Output

Interval

Menu/

Cancel

Enter

-

+

2.Press the [Enter] button to start the test.

If the results are normal all LEDs light. Then, the nine LEDs below the display flash and the display shows "End.2".

3.Press the [Enter] button to return to the self test 2 display.

5.5Memory Clear

The memory can be cleared to restore the default settings for the NMEA ports. Note that offsets are not cleared.

1.Hold down the [Menu/Cancel] button together with the [+] button until the display shows "- CLR". At this time all Status and Settings LEDs are on.

GPS OUTPUT PROCESSING

STATUS of IF-NMEASC

SENSOR1 SENSOR2

C L R

Heading Pitch Roll

Sentence Bps Output

Interval

Sentence Bps Output

Interval

Menu/

Cancel

Enter

-

+

2.Press the [Enter] button to clear the memory and restore all default settings. "END C" appears upon completion.

3.After the memory is cleared, press the [Menu/Cancel] button to show the heading.

13