Furuno IF-NMEASC manual Iii

Safety instructions for the installer

WARNING

Turn off the power at the switchboard before beginning the installation.

Fire or electrical shock can result if the power is left on.

Do not install the equipment where it may get wet from rain or water splash.

Water in the equipment can result in fire, electrical shock or damage to the equipment.

Be sure that the power supply is compatible with the voltage rating of the equipment.

Connecting an incompatible power supply can cause fire or damage the equipment. The voltage rating appears on the inlet of power.

Do not connect this unit to

NMEA 2000 bus.

It is intended for one-to-one connection with the SC-30. Connection to an NMEA 2000 bus can result in network trouble and, in the worst case, fire.

Do not open the equipment.

Only qualified personnel should work inside the equipment.

SAFETY INSTRUCTIONS

CAUTION

Observe the following compass safe distances to prevent interference to a magnetic compass:

	Standard	Steering
	compass	compass
IF-NMEASC	1.05 m	0.70 m

Warning labels are attached to the equipment. Do not remove these labels. If a label is missing or illegible,. contact a FURUNO agent or dealer about replacement.

WARNING	Name: Warning Label (1)
To avoid electrical shock,	Type: 86-003-1011-1
do not remove cover. No	Code No.: 100-236-231
user-serviceable parts

WARNING	Name: Warning Label (2)
	Type: 86-129-1001-1
To avoid electrical shock,	Code No.: 100-236-741
do not remove cover.
No user-serviceable parts
inside.

iii