17
USING THE MENUS :PICTURE

Using Manual Converge :Multipoint Red/Blue

The Multipoint Red/Blue convergence controls allow you to adjust

picture convergence at specific points on the TVscreen.

Note : Allow the TVto warm up for 20 minutes before adjusting

convergence. Adjust Converge Red or Converge Blue before using

the Multipoint Red/Blue controls. See the previous page.

1Select MULTIPOINTRED or MULTIPOINT BLUE in

the MANUAL CONVERGE menu.

2Press the cursor right to enter navigate mode.
3Use the cursor left, right, up, or down to move to a cross

hair that has a color outline.

4Press the m(Status/Exit) key to enter adjust mode.
5Use the cursor left, right, up, or down to adjust the cross

hair until the color outline is gone.

6Press the mkey to return to navigate mode.
7Repeat steps 3–6 until all misaligned cross hairs have been

adjusted. Then press the MENU key.

8For your multipoint adjustments to be stored in the TV’s

memory, you must activate SAVEMULTIPOINT.

Note : If you are not satisfied with the adjustments you just

made and want to start over, you can use the UNDO

MULTIPOINTcontrol. This control allows you to undo

the adjustments, but only if you use it before saving.

To save your multipoint adjustments : Select SAVE

MULTIPOINTand press the cursor left or right.

To undo your multipoint adjustments : Select UNDO

MULTIPOINTand press the cursor left or right.

To restore the TV’s picture convergence to factory settings,

select RESTORE FACTORYand press the cursor left or

right.

9Press the MENU key to return or the mkey to switch the
menu off.
to Navigate EXIT to Adjust
SAVE MULTIPOINT
UNDO MULTIPOINT
OR
RESTORE FACTORY
PICTURE
MANUAL CONVERGE
•CONVERGE RED
•CONVERGE BLUE
GMULTIPOINT RED •
‰
•MULTIPOINT BLUE
•SAVE MULTIPOINT
•
•
to Adjust EXIT to Navigateto Navigate EXIT to Adjust
to Adjust EXIT to Navigate
to Navigate EXIT to Adjust
to Adjust EXIT to Navigate
PICTURE
MANUAL CONVERGE
•CONVERGE RED
•CONVERGE BLUE
GMULTIPOINT RED •
‰
•MULTIPOINT BLUE
•SAVE MULTIPOINT
•
•
PICTURE
MANUAL CONVERGE
•CONVERGE RED
•CONVERGE BLUE
•MULTIPOINT RED
•MULTIPOINT BLUE
GSAVE MULTIPOINT •
‰
•
•
PICTURE
MANUAL CONVERGE
•CONVERGE RED
•CONVERGE BLUE
•MULTIPOINT RED
•MULTIPOINT BLUE
GSAVE MULTIPOINT •
‰STORED
•
•
PICTURE
MANUAL CONVERGE
•CONVERGE BLUE
•MULTIPOINT RED
•MULTIPOINT BLUE
•SAVE MULTIPOINT
GUNDO MULTIPOINT •
‰
•
•
PICTURE
MANUAL CONVERGE
•CONVERGE BLUE
•MULTIPOINT RED
•MULTIPOINT BLUE
•SAVE MULTIPOINT
GUNDO MULTIPOINT •
‰RESTORED
•
•
PICTURE
MANUAL CONVERGE
•MULTIPOINT RED
•MULTIPOINT BLUE
•SAVE MULTIPOINT
•UNDO MULTIPOINT
GRESTORE FACTORY •
‰
•
•
PICTURE
MANUAL CONVERGE
•MULTIPOINT RED
•MULTIPOINT BLUE
•SAVE MULTIPOINT
•UNDO MULTIPOINT
GRESTORE FACTORY •
‰RESTORED
•
•
OR