Philips 51PW9303 manual Model Specifications, Product Type

Appendix B

AB
ppendix		MODEL	SPECIFICATIONS
Product Type				S-VIDEO INPUT (INPUT-AV 1, INPUT-AV2, side panel)
Rear-projection HDTV Monitor				Y-INPUT: 1 Vp-p (includes sync), 75 ohms
				C-INPUT: 300 mVp-p, 75 ohms
Television System
				INPUT-AV 2
NTSC standard
				VIDEO (composite): 1 Vp-p, 75 ohms
Channel Coverage				AUDIO: 500 mVrms, 30 kohm
				HD INPUT-AV 4
VHF: 2–13
				Component Video YPrPb/RGB (See page 57)
UHF: 14–69
				AUDIO: 500 mVrms, 30 kohm
Cable TV: Midband
				HD INPUT-AV 5
	Superband
				Digital Video Interface (DVI) (See page 57)
	Hyperband
				AUDIO: 500 mVrms, 30 kohm
	Ultraband
				VIDEO/AUDIO OUTPUT
Ambient Operating Temperature
				VIDEO: 1 Vpp, 75 ohms
+41 to 113ºF (+5 to +45ºC)				AUDIO: Fixed: 500 mVrms into ˙10 kohm
Mains Voltage				Variable: 0–2 Vrms into ˙10 kohm
				Side Panel (AV3)
AC 110 ±10%
				VIDEO (composite): 1 Vp-p, 75 ohms
Power Consumption				AUDIO: 500 mVrms, 30 kohm
180W (average)				HEADPHONE: 1.5 Vrms, 16 ohm
Standby Power				Picture Display Capability
				1080i HD and 480p
<1W
Audio				Picture Visible Area
Frequency response: 20Hz–15kHz, +1/–3dB (ampl.)				51”
Stereo output with 2 x 10W RMS (50Hz–10kHz at 5% THD,				Product Dimensions
8-ohm load)
Two, 4 x 6” speakers				49” W x 55.1” H x 24.3” D
Video/Audio Terminals				Product Weight
INPUT-AV 1				184 lbs
VIDEO (composite): 1 Vp-p, 75 ohms				Supplied Accessories
AUDIO: 500 mVrms, 30 kohm
				Remote control with two size “AA” batteries.
COMPONENT VIDEO INPUTS (YPbPr)
Y INPUT: 1.0Vp-p (includes sync), 75 ohms				Design and specifications are subject to change without notice.
Pb INPUT: 700mVp-p, 75 ohms
Pr INPUT: 700mVp-p, 75 ohms
(The Pb INPUT jack can also receive signals from outputs
labeled Cb or B-Y. The Pr INPUT jack can also receive sig-
nals from outputs labeled Cr or R-Y.)

58