The HD INPUT-AV 4 and HD INPUT-AV 5 jacks allow you to connect digital equip-
ment with 1080i or 480p signal output.
WhatYou Can Connect to the
High-definition Input Jacks
1 HD INPUT-AV4—use to connect digital equipment with a 1080i or a 480p signal output, such as HD receivers (1080i or 480p) or DVD players with progressive- scan capability (480p). You can connect equipment with YPbPr component video or RGB outputs to the HD INPUT-AV 4 jacks. H and V Sync connections may or may not be required for RGB connec- tions. (See page 57.) Dedicated audio input jacks are located with the HD INPUT-AV 4 video jacks.
NOTE: The Picture-in-Picture (PIP) feature is not available for use with AV 4.
2 HD INPUT-AV5—accepts a digital video interface (DVI) plug, which uses digital data in the format data standard called Transition Minimized Differential Signaling (TMDS). Use HD INPUT-AV 5 to connect digital equipment with DVI (digital video interface) 1080i or 480p out- put. DVI is a specific digital input allow- ing encrypted transmission of uncom- pressed HD content. DVI includes HDCP (high-bandwidth digital content protec- tion), which is supported by the motion picture industry, satellite providers, and most of the consumer electronics industry. DVI is gaining momentum and quickly becoming an industry standard for the consumer to view high-definition material while keeping content protected. For sound, use the dedicated audio input jacks located with the HD INPUT-AV 5 DVI jack.
NOTE: The Picture-in-Picture (PIP) feature is not available for use with AV5.
HELPFUL HINT
Because DVI is such new technology, the electronics industry is still working toward a decision on one standard. Philips testing has determined that compatibility issues exist with respect to a limited number of high-definition receivers when they are connected to the DVI input on this televi- sion. If you should experience difficulties, please contact our Customer Care Center at 1-800-531-0039.
2
| | | Rear of TV | HD INPUT-AV 5 | 1 |
| | | |
| | | | | |
| | | | | DVI | |
| | | | | HD INPUT-AV 4 | |
| | | | | G/Y | |
ANTENNA IN 75Ω | | | | | R/Pr | |
INPUT-AV 1 | | OUTPUT | INPUT-AV 2 | |
| | Y | | | B/Pb | |
| | | | | |
| VIDEO | | VIDEO | | |
| S-VIDEO | | | S-VIDEO | | |
| Pb | | L | | |
| L | | | V | |
| | | | | L |
| L | | L | | L |
| | | | | SYNC | AUDIO |
| AUDIO | Pr | AUDIO | | AUDIO |
| R | | R | | H | |
| | | R | R |
| Summary of signal compatibilities | |
| | | | | Compatible output signal |
| | | | | from an external source | |
| TV Input | | | | or device | |
| | | 1080i (1080 lines, interlaced) or | |
HD INPUT-AV 4 | | | 480p (480 lines, progressive scan) | |
| | | Digital video interface (DVI) with | |
| | | 1080i (1080 lines, interlaced) or | |
HD INPUT-AV 5 | | 480p (480 lines, progressive scan) | |
HELPFUL HINTS
•The TV’s default color-space setting for HD INPUT-AV 4 is YPbPr. If the picture looks grossly incorrect, try changing the color-space setting on either the digital equipment or the TV. For more information on setting the color space on the digital equipment, see the equip- ment’s directions-for-use manual. To set the TV’s color space, see page 59 in this manual.
•This television is designed to be compatible with high-definition signal standards 1080i and 480p as specified by the Electronic Industries Association standard EIA770.3. Because output standards may vary by manu- facturer, you may encounter some digital equipment that will not properly display pic- tures on the TV.
•The PIP (Picture-in-picture) feature allows you to tune to a program in the main window and scan other channels in the PIP window. From a single antenna or cable input, signals are separated into two signals within the tele- vision. The AV1, AV2, and AV3 inputs are also available as PIP sources.
