cTV
Switches back to the antenna source from EasyLink mode.
dColor buttons
Selects tasks or options.
eSOURCE
Selects connected devices.
fOPTIONS
Activates the quick access menu (see ‘Use the quick access menu’ on page 13).
gOK
Activates a selection or accesses the menu.
h
(Navigation buttons) Navigates through the menus.
iINFO
Displays information about the TV channel or accessory device. The quality and accuracy of the information depends on the broadcaster. You might see a difference in broadcast time if the broadcast is from a different time zone.
j
(Fast Forward)
Searches forward on your EasyLink device.
k
(Record)
Starts or stops video recording on your EasyLink device.
lMUTE
Mutes or restores audio output.
mCH +/-
Switches to the next or previous channel.
nFORMAT
Selects a picture format.
oNumber buttons
Select a channel, page or setting.
p. (Dot)
Press the dot (.) for digital channels.
qPREV CH
Returns to the previously viewed channel.
rVOL +/-
Increases or decreases volume.
s
Stops playback on your EasyLink device.
t
Searches backward on your EasyLink device.
u
Starts, pauses or resumes playback on your EasyLink device.
vMENU/EXIT
Turns the menu on or off.
wBACK
Returns to a previous screen.
xAUTO MODE
Cycles through the preset picture and sound settings (see ‘Use Auto Mode’ on page 15).
yDEMO
Toggles the demo menu on or off.
zSLEEP
Sets a delay after which the TV switches to standby.
{ACTIVE CONTROL
The TV continuously measures and corrects incoming signals to provide the best picture quality.
English
EN 7
