IMPORTANT SAFETY INSTRUCTIONS

Read before operating equipment

1.Read these instructions.

2.Keep these instructions.

3.Heed all warnings.

4.Follow all instructions.

5.Do not use this apparatus near water.

6.Clean only with a dry cloth.

7.Do not block any of the ventilation openings. Install in accordance with the manufacturers instructions.

8.Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9.Do not defeat the safety purpose of the polarized or ground- ing-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and third grounding prong. The wide blade or third prong are provided for your safety. When the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10.Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11.Only use attachments/accessories specified by the manu- facturer.

12.

Use only with a cart, stand, tripod, bracket, or table

 

specified by the manufacturer, or sold with the ap-

 

p- paratus. When a cart is used, use caution when

 

moving the cart/apparatus combination to avoid injury from

 

tip-over.

13.Unplug this apparatus during lightning storms or when unused for long periods of time.

14.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

15.This product may contain lead and mercury. Disposal of these materials may be regulated due to environmental con- siderations. For disposal or recycling information, please contact your local authorities or the Electronic Industries

Alliance: www.eiae.org

16.Damage Requiring Service - The appliance should be serviced by qualified service personnel when:

A.The power supply cord or the plug has been damaged; or

B.Objects have fallen, or liquid has been spilled into the appliance; or

C.The appliance has been exposed to rain; or

D.The appliance does not appear to operate normally or exhibits a marked change in performance; or

E.The appliance has been dropped, or the enclosure damaged.

17.Tilt/Stability - All televisions must comply with recommend- ed international global safety standards for tilt and stability properties of its cabinet design.

• Do not compromise these design standards by applying excessive pull force to the front, or top, of the cabinet which could ultimately overturn the product.

• Also, do not endanger yourself, or children, by placing electronic equipment/toys on the top of the cabinet. Such items could unsuspectingly fall from the top of the set and cause product damage and/or personal injury.

18.Wall or Ceiling Mounting - The appliance should be mounted to a wall or ceiling only as recommended by the manufacturer.

19.Power Lines - An outdoor antenna should be located away from power lines.

20.Outdoor Antenna Grounding - If an outside antenna is connected to the receiver, be sure the antenna system is grounded so as to provide some protection against voltage surges and built up static charges.

Section 810 of the National Electric Code, ANSI/NFPA No. 70-1984, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding connectors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. See Figure below.

21.Object and Liquid Entry - Care should be taken so that objects do not fall and liquids are not spilled into the enclo- sure through openings.

Note to the CATV system installer: This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

Example of Antenna Grounding

as per NEC - National Electric Code

GROUND CLAMP

ELECTRIC SERVICE EQUIPMENT

ANTENNA LEAD IN WIRE

ANTENNA DISCHARGE UNIT (NEC SECTION 810-20)

GROUNDING CONDUCTORS (NEC SECTION 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H)

3

Rev. 8/13/01

Page 2 Page 4
Page 3
Image 3
Philips 60PW9363, 51PW9363, 55PW9363 manual Important Safety Instructions
Page 2 Page 4

60PW9363, 55PW9363, 51PW9363 specifications

The Philips 51PW9363, 55PW9363, and 60PW9363 are part of Philips' high-quality line of rear projection televisions that were notable for their impressive picture quality and innovative features at the time of their release. These models exemplify the advancements in display technology, providing a compelling viewing experience for film and television enthusiasts.

One of the primary characteristics of these televisions is their use of advanced DLP (Digital Light Processing) technology. This technology utilizes micro mirrors to project images, which leads to brighter and sharper images with greater color accuracy compared to traditional CRT televisions. DLP also enables superior motion handling, making these models ideal for fast-paced action films and sports.

The screens on the Philips PW9363 series range from 51 to 60 inches, providing ample display size for an immersive viewing experience. The televisions boast a resolution of 1280x720 pixels, which is sufficient for high-definition content and contributes to a clear picture quality. Additionally, they incorporate a wide viewing angle feature, allowing users to enjoy consistent picture quality from various positions in the room.

Another defining feature of the Philips PW9363 series is its Ambilight technology. This unique feature enhances the viewing experience by extending the colors of the on-screen image into the surrounding environment. It creates an atmospheric effect that can make movies and video games more engaging. The Ambilight system is adjustable, allowing users to customize the intensity of the colors based on their preferences.

Connectivity options on these models include multiple HDMI inputs, component video inputs, and a digital audio output. This variety allows users to connect various devices such as Blu-ray players, gaming consoles, and sound systems, ensuring a versatile home theater setup.

In addition to stellar picture quality and connectivity, the Philips PW9363 series is engineered with user-friendly features like an intuitive remote control and built-in preset TV settings that cater to different viewing scenarios. These televisions also include an integrated tuner for digital broadcasts, providing convenience for users to access regular television programming without the need for additional devices.

Overall, the Philips 51PW9363, 55PW9363, and 60PW9363 stand out for their combination of DLP technology, Ambilight features, and user-centric design, making them a solid choice for consumers seeking quality entertainment options in the home theater landscape.
Top Page Image Contents