Philips 55PW9363, 60PW9363, 51PW9363 Connecting AN S-VIDEO Device, Connect the S-VIDEO OUT jack on

Press the AV button on the remote con- trol as many times as necessary to select the AV2 source on the TV.

Connecting Accessory Devices to Your TV

CONNECTING AN S-VIDEO DEVICE

The S(uper)-Video connection on the back (and side panel) of the TV can give you better

picture detail and clarity for the playback of S- VHS VCR tapes or DVDs than the normal anten- na (RF signal) or Video (composite) picture con- nections. The example given connects a DVD/VCR Combi unit to the INPUT-AV 2 jacks on the back of the TV.

NOTE: The accessory device must have an S-VIDEO output jack to make the connection explained on this page.

To make the connections, you will need:

• one S-Video cable

• two cables for audio connections (standard

ANTENNA IN 75Ω

INPUT-AV 1 OUTPUT

Y

VIDEO

S-VIDEO

LPb

L

AUDIOPr

R

Back of TV

HD INPUT-AV 5

DVI

HD INPUT-AV 4

2 G/Y

R/Pr

B/Pb

S-VIDEO

L

	V
L	L	L
	SYNC
AUDIO	AUDIO	AUDIO
	H
R	R	R

RCA-type phono plugs).

NOTE: The cables are not supplied with your TV. You should be able to buy them at most stores that sell electronics. Or you can call our Customer Care Center at 1-800-531-0039.

DVD/VCR	1
OUT

		IN
		DIGITAL AUDIO OUT		COMPONENT
ANT-IN	L	PCM / BITSTREAM		VIDEO OUT
		DVD/VCR		Y
	AUDIO	AUDIO OUT
				Cr
	R	L
ANT-OUT
	VIDEO	R		Cb
		S-VIDEO	OPTICAL COAXIAL
	CH3 CH4	OUT

1 Connect the S-VIDEO OUT jack on the

Back of Device with S-Video Output (example only)

back of the accessory device with S-VIDEO output to the INPUT-AV 2 S-VIDEO jack on the back of the TV.

2 Connect the DVD/VCR AUDIO OUT jacks on the back of the accessory device to the INPUT-AV 2 AUDIO input jacks on the back of the TV.

3

4 Turn the accessory device on and press play to view the video source material (DVD or videotape, for example) on the TV.

AV2

POWER

TV	VCR	ACC
		ACTIVE
SWAP	PIP CH	CONTROL FREEZE
DN	UP
SOUND		PICTURE
STATUS/		MENU/
EXIT		SELECT
	MUTE
VOL		CH

	1	2	3
	4	5	6
	7	8	9
	TV/VCR	0
3	A/CH		SURF
	SURF		PIP ON/OFF
	REC •	FORMAT	SLEEP

HELPFUL HINTS

•To simplify making connections, audio cables are often color coded: red for the right channel, and white for the left chan- nel. The jacks on your TV are likewise color coded to match the plugs. To make S-Video connections, you must use an S-Video cable.

•You can also connect a satellite receiver, laser-disc player, video-game player, or other accessory device with S-Video capability to the TV in a manner similar to the example shown on this page.

•If you connect a satellite receiver to the TV, you will need to use the receiver’s channel-memorization system to store channels in the receiver’s memory.

WARNING

Video sources that show a constant non-mov- ing pattern on the TV screen can cause pic- ture-tube damage. When you are not using your video accessory devices, turn them off. Also, regularly alternate the use of accessory video sources with normal TV viewing. See page 60.

	SAP
AV	DOLBY V PROG.LIST

ITR/	HOME	HOME PERSONAL
RECORD	VIDEO	MOVIES

14