When the Inputs Are Used with RGB Video Signals | Philips 55PW9383

Appendix A

COMPATIBILITY INFORMATION FOR THE TV’S HIGH-DEFINITION INPUTS	A

Your set’s HD inputs (HD INPUT-AV 4 and HD INPUT-AV 5) are designed to accept

high-definition signal standards 480p and 1080i as specified by the Electronic Industries Association. Output standards may vary by man- ufacturer. Refer to the directions-for-use manual for the digital equipment before connecting.

HD INPUT-AV 4

When the Inputs Are Used with Component Video Signals

Y INPUT: 1.0 Vp-p (includes sync), 75 ohms

Pr INPUT: 700m Vp-p, 75 ohms

Pb INPUT: 700m Vp-p, 75 ohms

NOTES:

NOTE: HD INPUT-AV 5 is for DVI TMDS input	The Pb INPUT jack can also receive signals from outputs labeled Cb or B-Y.
only.	The Pr INPUT jack can also receive signals from outputs labeled Cr or R-Y.
	When the Inputs Are Used with RGB Video Signals

HELPFUL HINTS

•No industry standards have been estab- lished for HD television RGB signal sys- tems, timing, synchronization, and signal strengths. The HD INPUT-AV 4 RGB inputs on your Philips TV will not be compatible with all digital equipment that offers RGB outputs. If the digital equip- ment you want to connect offers both component video and RGB, component video is the suggested type of connection to use.

•Your TV’s on-screen INSTALL submenu provides the option of switching the AV4 signal source between YPbPr and RGB color-space settings. The option is avail- able only when you have selected the AV4 signal source (using the AV button on the remote or the Source Select button on the TV). The default setting for AV4 is YPbPr. See page 61.

G/Y: 1.0 Vp-p, 75 ohms (compatible with sync on green)

R/Pr: 700 mVp-p, 75 ohms

B/Pb: 700 mVp-p, 75 ohms

H:3 Vp-p ± 1.0 V, 1 kohm (when using separate H and V sync)

V:3 Vp-p ± 1.0 V, 1 kohm (when using separate H and V sync).

HD INPUT-AV 5

This input accepts a digital video interface (DVI) connector, which uses digital data in the format data standard called transition minimized differential signal- ing (TMDS).

59

Image 59

Philips 55PW9383, 60PW9383 manual When the Inputs Are Used with RGB Video Signals

Contents

Hdtv Monitor Warranty Verification Important Safety Instructions Contents End-of-life Disposal Features What You Can Connect to Standard Panel Jacks Panel Overview Standard Inputs and Outputs What You Can Connect to High-definition Input Jacks Panel Overview HIGH-DEFINITION Inputs Rear of TV Connecting a VCR Connecting a VCR and Cable BOX See the section below on using the Audio OUT control ConnectingUsing AN Audio HI-FI System with Your TV Making Optional SURROUND-SOUND Connections Four paired wires for speaker connections Rear of DVD Player Connecting a Standard DVD Player Rear of Device with Video Output Connecting AN S-VIDEO Device AV4 Connecting a DVD Player with PROGRESSIVE-SCAN Capability Connect coaxial cables Connecting AN HD Receiver to the HD INPUT-AV 4 JacksConnect S-VIDEO and audio cables. Note This example uses VOL Connecting a Camcorder TV’s side panel has a headphone jack for personal listening Connecting and Using Headphones with Your TV VCR Programming the TV Remote to Work with Accessory Devices Please read through all the steps before beginning Using the CODE-ENTRY Method to Program Your TV Remote Using the Search Method to Program Your TV Remote VCR DIRECT-ENTRY Codes for A/V Accessory Devices Television CH & TV/VCR Using the TV Remote with Accessory Devices Source you want to watch Using the AV and Source Select Buttons AutoSound Options Using Autosound Color Picture Using Autopicture Surf List Empty Using Autosurf Program List CVI Using Program List and Alternate Channel Sleep Timer Control Using Picture-adjustment Options Adjusting the Picture Controls Press the STATUS/EXIT button to turn the menu off Setting the EYE Fidelity Control MIN Setting the Dynamic Contrast Control Converge RED Adjusting the Manual Converge Controls Converge RED/BLUE Swap Adjusting the Manual Converge Controls Multipoint RED/BLUE Balance Adjusting the TREBLE, BASS, and Balance Controls Using the AVL Audio Volume Leveler Control Selecting the SURROUND-SOUND Modes Selecting a Surround-sound Option Using Remote Control Selecting the STEREO/MONO Sound Mode Selecting SAP Using TV Buttons Selecting the SAP Second Audio Program FeatureSelecting SAP Using Remote Control Speakers Using the Bass Boost Control Features Setting the Clock Channel Displaying the Time Time Setting the TIMER’S Start Time and Stop Time Press the Cursor Ring Right to enter the Features submenu Selecting the TIMER’S Channel Setting the TIMER’S Activate Control Understanding Autolock Features Setting UP the Autolock Access Code Install Using Autolock to Block Channels Format Using Autolock to Block by Movie Rating Using Autolock to Block by TV Rating Turning the Autolock Blocking Control on or OFF Using Autolock to Block Unrated Broadcasts To highlight the AutoLock Control Using Autolock to Block Broadcasts That have no RatingRIGHT. Then press the CUR SOR Ring Down once Press the STATUS/EXIT button on Reviewing Your Current Autolock Settings Mute Using the Closed Captioning Control Selecting a Picture Format Using the Remote Control Using the PICTURE-FORMAT Control Selecting a picture Format Using the TV Buttons Turning Active Control on or Off Using the TV Buttons Using Active Control When the Inputs Are Used with RGB Video Signals Model Specifications Space for HD INPUT-AV Setting Color Video-game images and scoreboards Care and Cleaning TV has no power Troubleshooting You are not able to get sound Glossary of Television Terms Index Canada Factory Service Locations Atlanta Cleveland Chicago This page is intentionally left blank This page is intentionally left blank Page Projection Television Limited Warranty