Philips 55PW9383, 60PW9383 manual Making Optional SURROUND-SOUND Connections

Connect from the Center Speakers out- put jacks on the amplifier with Dolby Pro Logic* or Dolby Digital to the correspon- ding CENTER CHANNEL INPUT jacks on the rear of the TV. Place the TV’s AMP switch in the EXT (external) position.

Connect from the L(eft) and R(ight) AUDIO OUTPUT jacks on the rear of the TV to the L(eft) and R(ight) TV IN jacks on the rear of the Dolby receiver.

Connect from the receiver’s front and surround speaker connectors to the front and rear surround speakers.

Connecting Accessory Devices to Your TV

MAKING OPTIONAL SURROUND-SOUND CONNECTIONS

Your TV has extra jacks that allow you to con- nect to an external audio amplifier system and

a powered subwoofer. This connection option will provide a surround-sound experience similar to a movie theater or concert hall.

To make the connections shown in this example, you will need:

•	two cables for audio connections (standard
	RCA connectors)
•	four paired wires for speaker connections

ANTENNA IN 75Ω		AMP SWITCH		1
		EXT	INT
		+	_	Rear of TV
				HD INPUT-AV 5
Front Speakers		CHANNEL AMP INPUT		DVI
				HD INPUT-AV 4
1				G/Y
				R/Pr
		INPUT-AV 1	OUTPUT INPUT-AV 2	SUBWOOFER
		Y		B/Pb
		VIDEO	VIDEO
	S-VIDEO		S-VIDEO
	L	Pb	L	V
		L	L	SYNC L	L
		AUDIO	AUDIO	AUDIO	AUDIO
				H
		R	R	R	R

Rear Speakers

+ - + -

• one cable for a subwoofer connection

(standard RCA connectors).

NOTE: The cables are not supplied with your TV. You should be able to buy them at most stores that sell electronics. Or you can call our Customer Care Center at 1-800-531-0039.

3 2

Rear of Amplifier with Dolby Pro Logic or Dolby Digital

Rear of Powered Subwoofer

1

2

3

ANTENNA IN 75Ω	AMP SWITCH			Rear of TV
	EXT	INT
+		_
				HD INPUT-AV 5
CENTER CHANNEL AMP INPUT				DVI
				HD INPUT-AV 4
				G/Y
				R/Pr
INPUT-AV 1		OUTPUT	INPUT-AV 2	SUBWOOFER
	Y			B/Pb
VIDEO			VIDEO
S-VIDEO			S-VIDEO
L	Pb		L	V
L			L	L	L
				SYNC
AUDIO	Pr		AUDIO	AUDIO	AUDIO
				H
R			R	R	R

Powered Subwoofer

				-180o	4
				Phase
				0o
90	150 Hz	1	10
Crossover		Volume
Frequency

R L

Low

Level

Input

	High
	Level
	Input
+ R –	– L +

High

Level

Output

4 Connect from the SUBWOOFER output jack on the rear of the TV to the L(eft) and R(ight) Low Level Input jacks on the rear of the powered subwoofer.

5 Set the TV’s AUDIO OUT control to FIXED. See page 10.

The diagram below, right shows how to arrange the speakers and subwoofer for surround sound.

HELPFUL HINTS

•If you use a single cable to make the connec- tion to the powered subwoofer, you will need to increase the volume on the back of the subwoofer to compensate for the absence of the second cable.

•You must adjust the trim of the powered sub- woofer at the powered subwoofer. Trim refers

*“Dolby”, “Pro Logic”, and the double-D symbol are trademarks of Dolby Laboratories.

Surround-sound Setup

NOTE: The gray circle indicates the primary viewing area.

TV

(Center Speakers)

Front	Front
Speaker	Speaker

Powered

Subwoofer

Rear	Rear
Speaker	Speaker

11