Philips 6 manual Using the S-VIDEO Input Jacks

Let's

Look

Inside!

USING THE S-VIDEO INPUT JACKS

The S(uper)-Video connection on the rear of the TV can provide you with better picture detail and clarity for the

playback of accessory sources such as DBS (digital broadcast satellite), DVD (digital video discs), video games, and S-VHS VCR (video cassette recorder) tapes than the normal antenna picture connections.

NOTE: The accessory device must have an S-VIDEO OUT(put) jack in order for you to complete the connec- tion on this page.

Connect one end of the S-VIDEO CABLE to the S-VIDEO jack on the back of the TV. Then connect one end the AUDIO (red and white) CABLES to the AV1 in AUDIO L and R(left and right) jacks on the rear of the TV.

Connect other end of the S- VIDEO CABLE to the S-VIDEO OUT jack on the back of the VCR. Then connect the other ends of the AUDIO (red and white) CABLES to the AUDIO (left and right) OUT jacks on the rear of the VCR.

1 BACK OF TV

Monitor out	AV1 in
75 V	COMPONENT VIDEO INPUT
VIDEO
L/	Y
Mono
AUDIO	S-VIDEO
	Pb
R	Pr

IF YOU ARE USING A MONO DEVICE, USE	AUDIO IN
ONLY THE AUDIO L/MONO JACK. IF A	(RED/WHITE)
DUMMY JACK IS PLUGGED INTO THE
AUDIO R, NO SOUND WILL BE HEARD.

OUT

5	R AUDIO L
	IN

S-VIDEO

CABLE2

OUT	S-VIDEO OUT
	ANTENNA
VIDEO	IN
IN	ANTENNA
	OUT

Turn the VCR and the TV ON.

Press the CH + or – buttons on the remote to scroll the channels until AV1 appears in the upper left corner of the TV screen.

Slide the TV/VCR/ACC switch to the VCR position.

Now your ready to place a prere- corded video tape in the VCR and press the PLAY button.

BACK OF VCR

6

3 VCR (EQUIPPED WITH S-VIDEO JACKS)

VOL

4

SMART HELP

The S-VIDEO and VIDEO AV1 in(puts) are in parallel. The

S-VIDEO input is dominant when in use. If separate video signals are con- nected to the S-VIDEO and VIDEO AV1 in(puts), the signal from the VIDEO AV1 in(put) will not be usable.

24