Philips 6 manual Place the TV/VCR/ACC Mode, Point the remote control at

REMOTE USE WITH ACESSORY DEVICES - DIRECT METHOD
our remote control is set to work
Yyour TV and many infrared remote
(IR) control VCRs, Cable Boxes,
Satellite Systems, DBS, DVD, etc.
However, an easy onetime step may be
necessary before the remote will work
your VCR.
Try this initial Direct Access Method to
see if going on to the following section
is necessary.
Place the TV/VCR/ACC Mode	1
Switch in the proper position.
Point the remote control at the
device and press the POWER button.
Does the remote turn the device ON?	VCR
If YES, stop and try other function but-
tons on the remote. If they also work
the device, then the remote is ready and
no further steps are needed.
If NO, continue...
	Satellite Receiver
First look up a THREE-DIGIT
remote control number for your brand
of Device before going through the sim-		2
ple steps on the following page.	Cable Converter
Find your Three-Digit Code on pages
35-37.
SMART HELP
Remember, if more than one
number is listed, you may have to
try more than the first Three-Digit code
given in order to locate your Device’s
remote code.
NOTE: Setting up the remote is for use
with external accessory devices only and
not for use with other television brands.
	31