Quick install Guide
GUIDE Plus+® Table
Please enter here the data of the TV channels in the GUIDE Plus+® System. This can be helpful if you have to install the GUIDE Plus+® System again or other situations.
Using a pencil helps you to make changes afterwards.
Please observe:
•All data of the GUIDE Plus+® System has been loaded. (after 24 hours).
•All TV channels have been allocated to the right programme numbers Read in the instruction manual the chapter 'Additional installation features' the section 'allocating/deleting TV channels manually'.
If TV channels were rearranged, stored or deleted, you have to switch off the
Only that way the new data can be transferred to the GUIDE Plus+® system.
•If you have connected an external Receiver (Satellite receiver, cable box, ...) write also the programme number of the TV channel from the external receiver in this list.
•You will find this table in the
-Switch the
-Press GUIDE/TV on the remote control
-Select the menubar using A ,
-Press as often as necessary C until the field 'Editor' is marked.
Home
Editor displays your TV channel settings. You may switch channel On or Off (grey), select their Source and their programme number. Press Bto use. Press Dfor Info. Press Cfor Setup.
Search | Schedule | Info |
| Editor |
Name | On/Off | Source | Programme N. | |
BBC1 | On | TV |
| P 001 |
BBC2 | On | TV |
| P 002 |
ITV | On | TV |
| P 003 |
CH4 | On | TV |
| P 004 |
-Copy the displayed table in this list.
-You can go up/down one page using CHANNEL q , CHANNEL r .
The amount of channels is depending on your setup/devices.
Name | On /Off Source | Programme N. |
ENGLISH
15
