Quick install Guide
Starting a recording without data from the GUIDE Plus+® system:
If no data is available from the GUIDE Plus+® system, or in case the recording is made from a satellite receiver connected to the EXT1 TO
1In case the time bar of the Time Shift Buffer is not visible on the screen, press INFO on the remote control.
2Press REC/OTR n .
P The red light around the record button n on the front will switch on.
P '1 Programm +30' will appear on the screen on the right end of the time bar. . This indicates that the recording will automatically end after 30 minutes. Press
REC/OTR n several times to prolong the
Recording the previous TV show
If the DVD recorded has been on for some time, the Time Shift Buffer already contains recordings. You can select those recordings (TV shows) that you want to store on the HDD.
-Select the beginning of the oldest recording with D or C and hold down REC/OTR n to mark the recording from the beginning.
-Select the end of the most recent recording using C or D and hold down the RED function button to cut off the end.
You can remove the marker using the RED function button.
Starting a recording from the current position (from here onward)
You can also start a recording immediately, regardless of the recordings in the Time Shift Buffer.
1Hold down REC/OTR n until the red light on the record button n at the front switches on.
Ending a recording automatically
Recordings will be automatically ended if data from the GUIDE Plus+® is available or if you entered the end while starting a recording
Ending a recording manually(immediately)
1If necessary, switch the TV set to the programme number (input socket) of the DVD recorder.
2Press STOP h
PA message appears on the screen, asking whether you really want to end the recording.
OIf you want to end the recording, select 'Yes' with D and confirm with OK .
OIf you do not want to end the recording, confirm 'No' using OK .
STOP h will always end only the current recording (current time).
If you want to end a recording earlier than scheduled (jump back in the Time Shift Buffer using D ), proceed as follows:
-Press INFO to display the time bar.
-Hold down the red function button.
3To permanently store the recording on the hard disk, you have to erase the Time Shift Buffer. The following options are available: O the preset Time Shift Buffer period expires (the default setting
is 3 hours)
Othe Time Shift Buffer is manually erased ('Flush
Buffer'function( SYSTEM MENU button, 'Set up'menu ))
Oyou turn off the DVD recorder with STANDBY m
Oyou switch to camera mode using CAM (switch back with the same function button).
ENGLISH
9
