![](/images/new-backgrounds/1285605/28560593x1.webp)
TIPS IF SOMETHING ISN'T WORKING
Please make these simple checks before calling for ser-
vice. These tips can save you time and money since charges for TV installation and adjustment of customer controls are not cov- ered under your warranty.
No Power
No Picture
No Sound
Remote Does Not Work
TV Displays Wrong
Channel or No
Channels Above 13
CAUTION: A video source (such as a video game, Compact Disc Interactive - CDI, or TV information channel) which shows a constant
•Check the TV power cord. Unplug the TV, wait 1 minute, then reinsert plug into outlet and push POWER button again.
•Check to be sure outlet is not on a wall switch.
•Check antenna connections on the rear of the TV. Are they properly secured to the antenna plug on the TV?
•Check the CABLE TUNING control for correct position.
•Check PICTURE SOURCE control for correct position ANTENNA; AUX 1/AUX2 VIDEO; or AUX Y PB PR position without a signal source connection will result in a blank screen.
•Check the CLOSED CAPTIONS control. Some TEXT modes could block the screen.
•Check the VOLUME buttons.
•Check the MUTE button on the remote control.
•Check the TV SPEAKER ON/OFF control for the correct position.
•If attempting auxiliary equipment
•Check
•Check batteries. Replace with AA Heavy Duty (Zinc Chloride) or Alkaline batteries if necessary.
•Clean the remote and the remote sensor window on the TV.
•Repeat channel selection.
•Add desired channel numbers (ADD/DELETE CHANNELS control) into TV memory.
•Check CABLE TUNING control for correct position.
This TV is equipped with protective circuitry that shuts the TV off in case of moderate power surges. Should this occur turn the TV back on by pressing the POWER button once or twice, or unplug and then replug the power cord at the AC outlet.
This feature is NOT designed to prevent damage due to high power surges such as those caused by lightning, which is not covered by your warranty.
Cleaning and Care
•To avoid possible shock hazard be sure the TV is unplugged from the electrical outlet before cleaning.
•When cleaning the TV screen take care not to scratch or damage the screen surface (avoid wearing jewelry or using anything abrasive- do not use household cleaners). Wipe the front screen with a clean cloth dampened with water. Use even, easy, vertical strokes when cleaning.
•Specially designed screen cleaning kits are also available which contain
•Gently wipe the cabinet surfaces with a clean cloth or sponge dampened in a solution of cool clear water and a mild soap or detergent. Use a clean dry cloth to dry the wiped surfaces.
•Occasionally vacuum the ventilation holes or slots in the cabinet back.
•Never use thinners, insecticide sprays, or other chemicals on or near the cabinet, as they might cause permanent marring of the cabinet finish.
47