Philips AC4076 user manual English, Storage, Accessories, Filter

2

1

English 17

6Put filter 2 (New home filter) back into the appliance.

Note: Make sure that the side with the tag is pointing towards you.

7Put filter 1 (pre-filter) back into the appliance.

Note: Make sure that the side with the two projections is pointing towards you.

Note: Make sure that all hooks are properly attached to the appliance. 

8To reattach the front panel, insert the bottom hooks into the bottom of the appliance first (1).Then push the panel against the body of the appliance (2).

9Put the plug in the wall socket and switch on the appliance again.

10Press the filter reset button with a thin tool.

Note:You do not need to press the filter reset button after cleaning filter 1 (pre-filter).

Note:You cannot reset the appliance when you replace a filter before its filter replacement light starts flashing.

Note:You cannot reset the appliance if it is not plugged in and switched on.  

Storage

To store the mains cord, wind it round the cord storage facility at the bottom of  the appliance.

Accessories

New filters are available under the following type numbers:

Filter	Type number
Filter 2: High Capacity Formaldehyde / Particle	AC4147
New Home filter