Philips AC4076 user manual 18English, Environment, Guarantee and service, Troubleshooting, Problem

Models: AC4076

1 20
Download 20 pages 12.46 Kb
Page 18
Image 18
18English

18English

Environment

-- Do not throw away the appliance with the normal household waste at the end of its life, but hand it in at an official collection point for recycling. By doing this, you help to preserve the environment.

Guarantee and service

If you need information or if you have a problem, please visit the Philips website at www.philips.com or contact the Philips Consumer Care Centre in your country (you find its phone number in the worldwide guarantee leaflet). If there is no Consumer Care Centre in your country, go to your local Philips dealer.

 

Troubleshooting

 

This chapter summarises the most common problems you could

 

encounter with the appliance. If you are unable to solve the problem with

 

the information below, contact the Consumer Care Centre in your country.

Problem

Possible solution

 

 

Buttons are not

Replace the New home filter when the filter replacement light started

responding.

flashing and the appliance has sounded every 30 minutes after approx.

 

2 weeks. Replace the filter and reset the appliance (see chapter ‘Filter

 

replacement’) so that the appliance can operate again.

No air comes out of the air outlet

The appliance is not switched on. Put the plug in the wall socket and switch on the appliance.

The air quality is good and the auto mode is activated. In this case, the appliance switches off automatically when the air is clean to save electricity.

The fan speed does not change when the AUTO mode is activated.

When the room becomes dark, the night mode is activated automatically when the appliance is in auto mode. In this case, the fan speed is set to a very low level. If you want to change the fan speed, press the FAN SPEED button one or more times to set the desired fan speed.

The airflow that comes out of the air outlet is significantly weaker than before.

The pre-filter is dirty. Clean the pre-filter (see chapter ‘Cleaning’).

You haven’t removed all packaging material from the filters. Make sure that you have removed all packaging material.

The air quality does not improve, even though the appliance has been operating for a long time.

One of the filters has not been placed in the appliance. Make sure that all filters are properly installed in the following order, starting with the innermost filter: 1) New home filter, 2) pre-filter.

Page 18
Image 18
Philips AC4076 user manual 18English, Environment, Guarantee and service, Troubleshooting, Problem, Possible solution