16English
Healthy air protect lock
If you do not replace the filter in time, the appliance stops operating approx. 2 weeks after the filter replacement light started flashing.When the appliance is locked, it does not operate until you have replaced with the new filter and pressed the reset button.
Note:When filter replacement lights 2 and REPLACE FILTER on the control panel are on continuously, the appliance is locked (see section ‘Filter maintenance’ in this chapter for more information).
How long it takes before the appliance is locked depends on the operating time and speed level selected after the filter replacement alert. Approximately 1 day before the appliance locks, it beeps every 30 minutes to inform you that one of the filters needs to be replaced.
When the appliance is locked, you hear a beep when you press any button. You can switch off the appliance by pressing the on/off button.
If the appliance is locked:
1Check which filter needs to be replaced (see section ‘Filter replacement lights’).
2Switch off the appliance and unplug it.
3Replace the appropriate filter (see section ‘Replacing the filters’).
Replacing the filters
Tip: Place the appliance against a wall for more stability when you remove or insert filters.
1
2
3
4
5
Switch off the appliance and unplug it.
Place your fingers in the recesses of the side panels and gently pull the top part of the front panel towards you.Then lift the hooks at the bottom of the panel out of the bottom of the appliance.
To remove filter 1
To remove filter 2 (New home filter), grab its tag and pull it towards you.
Discard the filter that needs to be replaced and unpack the new filter.
