Philips AC4076 user manual Electromagnetic fields EMF, Before first use, Placing the filters

English 7

-- Always unplug the appliance after use and before you clean it.

-- Do not use the appliance in a room with major temperature changes, as this may cause condensation inside the appliance.

-- The appliance is only intended for household use under normal operating conditions.

-- Do not use the appliance in wet surroundings or in surroundings with high ambient temperatures, such as the bathroom, toilet or kitchen.

-- The appliance does not remove carbon monoxide (CO) or radon (Rn). It cannot be used as a safety device in case of accidents with combustion processes and hazardous chemicals.

Electromagnetic fields (EMF)

This Philips appliance complies with all applicable standards and regulations

regarding exposure to electromagnetic fields.

Before first use

Placing the filters

The appliance comes with all filters fitted inside, but you have to remove the packaging of the filters before you can use the appliance. Remove all filters, unpack them and place them back into the appliance as described

below.

Tip: Place the appliance against a wall for more stability when you remove or insert filters.

Note: Make sure you insert the filters in the correct position.

1Place your fingers in the recesses of the side panels and gently pull the top part of the front panel towards you.Then lift the hooks at the bottom of the panel out of the bottom of the appliance.