5 ADIM CONFIGURATION

The ADIM software is pre-loaded. No software installation is required.

Open the ADIM Application by double clicking the ADIM icon on your desktop.

5.1Logging ON and User Levels

• Log in with a user name and password.

If configuring the system, logon as a user with Installer or Administrator privileges. This grants access to all areas.

NOTE: The ADIM’s user name and password are the same as the Master Control Software for Windows.

User levels for ADIM and Master Control Software for Windows:

User Level

Default User

Default

Areas of Access

Names

Passwords

 

 

 

 

 

 

Installer

Installer

1

Status, Monitoring

& Configuration

 

 

 

 

 

 

 

Administrator

Administrator

2

Status, Monitoring

& Configuration

 

 

 

 

 

 

 

Operator

Operator

3

Status, Monitoring

 

 

 

 

NOTE: The PC is pre-configured to automatically log into Windows NT and start the ADIM application. ADIM can be configured to automatically log in, bypassing the log in dialog.

This allows automatic start up of the ADIM application when the PC is restarted.

1. Select or create an Allegiant Server document.

NOTE: ADIM will automatically open the last Allegiant document, therefore this screen may not be seen.

2.If creating a new Allegiant document, select the type of Allegiant:

3.The ADIM Status and Monitoring screen is displayed as shown in Figure 5.1.

Figure 5.1

12

Page 12
Image 12
Philips ADM0101 Adim Configuration, Logging on and User Levels, User Level Default User Areas of Access Names