Philips ADM0101 installation instructions Adim Keyboard Operation

Program User

Sequence Functions

LoadADIM

Sequence Controls

HoldStart

Sequence Sequence

<Previous Next>

<Sequence Sequence>

<Stop Stop>

Figure 7.2

7 ADIM KEYBOARD OPERATION

SoftKey Display

7.1Product Menu

Allegiant

ADIM

Keyboard

Control

Figure 7.1

To ensure that the IntuiKey Keyboard is properly connected to the ADIM system, press the IntuiKey’s Product key. The ADIM On-Linesoftkey option (see Figure 7.1) will only be displayed if the IntuiKey Keyboard is properly connected and configured, and the ADIM application is running.

Press the ADIM On-Line softkey to bring up the Allegiant main menu. The ADIM Controls softkey is now displayed.

SoftKey Descriptor		Status Display	Numeric
			Entry Cell
		Monitor		Camera
Exit			1	1
				MUX/DVR
^ Up	Zoom	Prod		Mon
< Left	Right >	Clr		Shot
v Down		1	2	3
		4	5	6
		7	8	9
		0
SoftKeys		Numeric Keypad

NOTE: If ADIM is offline, the ADIM Controls softkey will not appear (will be blank on the IntuiKey Keyboard).

7.2Allegiant Main Menu

Upon pressing the ADIM	Exit	User
Controls softkey, the		Log Off
	Device	Command
following occurs:	Lockout	Script
	Alarm	Camera
	Control	Control

•If the selected camera

is found and the DVR is

mapped and available, pre-recorded video from the present camera is

displayed on the selected CCTV monitor. (The default pre-recorded time is 1-minute.) In addition,

the Keyboard displays the ADIM Controls menu (Figure 7.3).

•If the requested camera or monitor is not mapped to a DVR (within the ADIM), the error message, Requested Device Not Found, (along with an audible beep) is displayed on the Keyboard.

•If the camera is found, but the DVR is in use by another operator, the error message, DVR in Use, (along with an audible beep) is displayed on the Keyboard.

Refer to Appendix E for more information.

IntuiKey Components

7.4Joystick Operation

When in ADIM Controls mode, the IntuiKey Joystick can be used for the following actions:

•Navigation of the Menus Screen of the DVRs (UP, DOWN, LEFT, RIGHT).

•Proportional Playback Speed (clockwise rotation for fast forward; counterclockwise rotation for fast reverse).

7.5Numeric Keypad Buttons

When in ADIM Controls mode, the IntuiKey Keypad buttons perform the following functions:

•Enter corresponds to the Hi-Q’s front panel OK or Select button.

•The 1, 2, 3, and 4 keypad buttons on the keyboard emulate the Hi-Q’s front panel buttons.

7.6Softkey Buttons

When in ADIM Controls mode, the IntuiKey softkeys perform the appropriate action for the specific DVR.

The Exit button performs the following actions:

•Returns the DVR to the system (makes available for other users).

•Returns the keyboard to its previous menu.

•Returns the Live camera view (direct from the Allegiant) to the present monitor.

7.3ADIM Controls Menu

Exit	Play/
	Search
Quad	Stop
OSD	Zoom
	Frame
	Advance
Alarm	Pause
List
1-Touch	Menu
Alarm
Alarm	Okay
Clear

The ADIM Controls menu is used to control the Hi-Q (DVRRT4, DVRRT4EP) from the IntuiKey Keyboard.

NOTE: Details regarding the functions of the other buttons may be found in the IntuiKey Keyboard and Philips DVR Instruction Manuals.

7.7Keyboard Error Handling

If the IntuiKey keyboard fails to communicate with the system, an error message, ADIM Communication Error (along with an audible beep) displays on the keyboard.

7.8Clearing ADIM Alarms

ADIM messages (see Appendix A) will be displayed on the assigned CCTV monitors. Ensure the keyboard is NOT in the ADIM Controls menu. Use the IntuiKey Keyboard’s CLR to clear ADIM Alarm messages.

Figure 7.3

17