CD Player
CD playback
This CD clock radio supports audio discs including
1Press
2If CD is not selected, press SOURCE once or more to select it.
➜
is displayed.
3Lift the CD door to open.
4Insert a CD with printed side facing up, and close the CD door.
➜Flashing
5Press ); to start playback.
➜During the playback, the current track number is displayed instead of the total track number.
6To view Clock, press DISPLAY.
➜The clock time is displayed for several sec- onds, then it will switch back to playback
time information.
7To adjust the sound, press VOLUME.
8To interrupt, press );. To resume playback, press ); again.
9To stop playback, press 9.
10To switch off CD playback and back to standby, press
Finding a passage within a track
1During playback, press and hold down ∞ or §.
➜The CD is played at high speed and low volume.
2Release ∞ or § when you recognize the passage you want.
➜ Normal CD playback resumes.
Programming tracks
You may store up to 20 tracks in the desired sequence for playback. If you like, store any track more than once.
1In the stop position, press PROG to enter programming mode.
➜P01 is displayed (See 4).
2Press ∞ or § to select desired track.
3 Press PROG to store the track.
➜P02 is displayed
4Repeat steps 2 to 3 to select and store all desired tracks.
➜If you attempt to store more than 20 tracks, no tracks can be stored.
5Press ) ; to play the program. ➜ PROG is displayed (See 5)
To erase a program, select any of the following.
–In stop position press PROG to enter pro- gram mode and press 9;
–Open the CD door.
–Press
–Select other sources.
Selecting a different track
•Press ∞/ § once or repeatedly until the desired track number appears on the display.
•In the stop position, press ); to start playback.
