Playing a CD
1Set the POWER slider to CD.
2Press / OPEN to open the CD compartment.
3Insert an audio CD (printed side up) and close the CD compartment.
™The CD player starts and scans the contents list of the CD. Then, the CD player stops. Display indication: the total number of tracks.
ECORD | SEARCH |
|
PLAY
OPEN
RECORD
English
4 Press the 2; button to start CD play.
™Display indication: the current track number.
5 Press the 9 button to stop CD play.
™ Display indication: the total number of tracks.
CD MODE
You can interrupt CD play by pressing 2;. Continue CD play by pressing the button again.
™Display indication: the current track number (flashing).
Note: CD play will also stop if:
–you open the CD compartment,
–the end of the CD is reached, or
–you move the POWER slider.
If you make a mistake when operating the CD player, or if the CD player cannot read the CD, the display shows E or no. (See ”TROUBLESHOOTING”.)
If you press 2; and there is no CD inserted, the display shows no.
7