Philips AZ 1009, AZ1010 CD MODE: Programming track numbers, Playing the program, Erasing the program

CD PLAYER

CD MODE: Programming track numbers

You can select a number of tracks and store these in the memory in the desired sequence. You can store any track more than once. A maximum of 20 tracks can be stored in the memory.

1 When CD play is stopped, select the desired track with ° or §.

2As soon as the number of the desired track is displayed, press

CD MODE to store the track in the memory.

™PROGRAM appears on the display. P lights up briefly, then the

PROGRAM

number of the stored track is shown.

3Select and store all desired tracks in this way.

4You can review your settings by pressing and holding CD MODE for more than 1 second.

™ The display shows all stored track numbers in sequence.

If you try to store more than 20 tracks, the display shows F.

PROGRAM

Playing the program

Press 2; to play the program.

PROGRAM

Erasing the program

From the stop position, press 9.

™no lights up briefly, PROGRAM disappears and your program is erased.

English

Note: The program will also be erased if you:

–interrupt the power supply,

–open the CD compartment, or

–move the POWER slider.

PROGRAM

9